|
DISPLACEMENT SENSOR
|
Model EDE-VXX Vibrating
Wire Linear Displacement Transducer |
 |
|
EDE-VXX linear displacement transducer incorporates a
vibrating wire sensor that converts mechanical
displacement to an electrical frequency output. This
output can be transmitted over long distances. The
sensor can be used in uniaxial joint meters, triaxial
joint meters, crack meters, borehole extensometers and
soil extensometers, etc.
The sensor is available in
following variants:
EDE-VXX-SC with side cable (suitable for crack gage)
EDE-VXX-RC with rear cable (suitable for BHE)
EDE-VXX-WP waterproof
Note: If purchase order does not specify, ’RC’ version will be supplied
|
Specifications: |
|
Transducer type |
Vibrating wire |
|
Range (mm) |
50, 100 or 150 mm |
|
Accuracy |
0.2 % fs normal
0.1 % fs optional |
|
Sensitivity
|
0.02 % fs
|
|
Non-linearity |
0.5 % fs |
|
Temperature limit |
- 10 to 50° C |
|
Cable |
Four-core shielded 1 m long; specify |
|
|
Model EDE-PXX Potentiometric
Linear Displacement
Transducer |
|
Linear displacement transducer incorporates a potentiometric sensor. The usage is same as that of EDE-VXX.
|
Specifications: |
|
Transducer type |
Potentiometric |
|
Range (mm) |
50, 100 |
|
Input |
5 ~ 13 V DC |
|
Output |
0 – 2 V DC (nominal)
|
|
Accuracy |
0.1
% fs |
|
Sensitivity |
0.02 mm |
|
Cable |
Four-core shielded 1 m long; specify |
|
 |
|
|
|
©2008 Copyright
All rights reserved.
Encardio-rite
Electronics Pvt. Ltd.
A-7 Industrial Estate, Talkatora Road, Lucknow, UP-226011, India
P +91 522 2661044, 2661040; F +91 522 2661043; websales@encardio.com |
|
